* Electric Car Battery Module Pack Automatic Production Line Battery Assembly Line

1.1.1  Project Overview
This project is a module and battery system production line, which is a turnkey project, including design, manufacturing, transportation, installation, debugging, training, co-production, after-sales service, etc. It includes the production assembly and testing of modules and systems.

1.2.2 Overall Production Line Requirements
1) The first-phase production line - single line 7PPM (Processing cells per minute, including OEE), OEE: 85%; prototype module: 12 cells
2) Equipment failure rate: ≤2%


1.2 Flow Chart:




2. Program Layout - Layout-Module Assembly 


 

 

3. Function Module Introduction
 

3.1   Cell handling and stacking 

Cell pre-stacking


Process description:
Equipment description:



Process description:
Equipment description:


3.4 Introduction of safety fence:

 

1. The design, manufacture and control of the safety fence comply with the relevant national regulations on production safety to ensure the safety of the production process.

2. Protective fences, fences, safety nets and other facilities are set up in places where human or machine damage may occur, and necessary interlocking protection is carried out. The safety door lock should be interlocked with the system. The safety door is self-locking and cannot be opened when the production line is working.

3. Entering the security door operation process: apply for entry - the robot and other equipment are parked in a safe position - the security door is opened - enter the security door.

4. Operation process for resuming production: go out of the security door - confirm that there is no one in the equipment area - close the security door, enter the recovery password, and the security door is self-locking - the equipment is operating normally.

3.5 Insulation withstand voltage test station:


PACK Electrical Function Test and Offline Section